Installation Manual

RRAC095_REV_A01
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.2
2.3
2.4
2.1
2.4
2.5
2.6
To fold the Vertical Surfboard Bracket down
press the two tabs towards each other
as indicated by the arrows.
Raise the Vertical Surfboard Bracket
providing space to loosely fasten the
Vertical Bracket Catches (Item 3) to your
Front Runner Rack. Place the Vertical
Bracket Catch over the remaining two
M8 x 16 Hex Bolts inserted in Step 2.1.
Fasten the Catch with two M8 x 16 x 1.6SS
Flat Washers (Item 5) and two M8 Nyloc
Hex Nuts (Item 8). Make sure that the
bracket is orientated as shown.
4MM
10MM
Place the Support Bracket (Item 1)
in-between the side profile and Vertical
Surf Board Bracket. Make sure that the slot
in the front of the bracket points inward
toward the middle of the rack.
Fasten the two brackets with two M8 Button
Head Screws (Item 4) and two M8 Flat
Washers (Item 5) to the side profile
with the Nyloc Hex Nuts you inserted
in Step 2.2.