Installation Manual

2
GET ORGANIZED
You will need:
 10 mm Flat and Socket Wrench
 Drill machine
 6.5 mm Drill Bit
 Scriber or suitable marking device
 Ladder
 Friend
Note: Not all the fasteners supplied will be used and will vary depending on the fitment.
Slimline ii RACK (Steps 2A-F)
Here is what you are looking at:
REV_A01
Slimline RACK (STEPS 3A-F)
You will need:
 10 mm Flat and Socket Wrench
 13 mm Flat and Socket Wrench
 5 mm Hex Key
 Ladder
 Friend
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
()
A
Here is what you are looking at:
Item # Quantity Description
1 6 M8 x 25 COUNTERSUNK BOLT
2 2 AWNING BRACKET
3 4 M8 x 25 BUTTON HEAD BOLT
4 12 M8 FLAT WASHER
5 10 M8 NYLOC NUT
6 6 M8 NUT CAP
7 2 M8 x 30 BUTTON HEAD BOLT
Item # Quantity Description
1 6 M8 x 25 COUNTERSUNK BOLT
2 2 AWNING BRACKET
3 6 M8 FLAT WASHER
4 6 M8 NYLOC NUT
5 6 M8 NUT CAP
6 8 M6 x 16 HEX BOLT
7 8 M6 FLAT WASHER
8 8 M6 NYLOC NUT