Installation Guide

LAVT001_REV_A04
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
6
FIT AND SECURE 3
3.2
3.3
3.4
Carefully open the rear door. Do not let the
rear door swing open.
Loosen and remove the right hand screw on
the left hand door hinge.
Ensure the top mount hooks from the
Ladder are against the top edge of the rear
door. Place the T5 - Pinch Bracket (Item
2) over the top mount hooks, lining up the
slotted hole in the Pinch Bracket with the
screw hole. Center the ladder between the
Pinch Bracket clamps.
Secure the Pinch Bracket to the vehicle
using the screw removed. Fully tighten.
Carefully close the rear door.
B
B
10mm
10mm
CONTINUE TO 3.7
C
Hook the T6 - Ladder Top Mount (Item 3)
over the top edge of the Rear Door.
Pull the top lip against the top edge of the
rear door and let the ladder rest against the
vehicle.
Insure rubber strip is placed under the
bracket.
C
T5 - VEHICLE FITMENT
T5 - VEHICLE FITMENT
C
T6 - VEHICLE FITMENT