Installation Guide

LAVT001_REV_A04
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4
PREPARE 2
2.4
2.5
2.6
Secure the T5 - Ladder Top Mount (Item 1)
to the assembled Ladder using four M6x16
Button Head Screws and four M6 Nyloc Nut
(Item 7, & 15).
Secure the T6 - Ladder Top Mount (Item
3) to the assembled Ladder using four
M6x16 Button Head Screws, four M6 Spring
Washers (Item 7 & 15).
4mm
7
1
Secure the Fixing Plate Assembly (Item 13)
to the bottom of the ladder using two M6
Flat Washers and two M6 Nyloc Nuts (5 &
15). Finish off by placing two M6 Nut Caps
on the M6 Nyloc Nuts (Item 14).
FOR PERMANENT FITMENT, SKIP THIS
STEP AND CONTINUE TO 2.7.
10mm
5
15
14
13
7
3
CONTINUE TO 2.6
4mm
T6 - VEHICLE FITMENT
T5 - VEHICLE FITMENT
15
15