Installation Guide

10
7
LAVT001_REV_A04
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
PREPARE 2
2.1
2.2
2.3
Secure the two Angled Ladder Rungs (Item
17) to the Top RH Ladder Side (Item 8) and
the Top LH Ladder Side (Item 18) using
eight M6x12 Button Head Screws and eight
M6 Nyloc Nuts (Item 9 & 15). Finish off by
placing M6 Nut Caps (Item 14) over the M6
Nyloc Nuts (Item 15).
Secure the three Ladder Rungs (Item 12) to
Bottom RH Ladder Side (Item 11) and Bottom
LH Ladder Side (Item 16) using twelve M6 x
16 Button Head Screws and twelve M6 Nyloc
Nuts (Item 9 & 16). Finish off by placing M6
Nut Caps (Item 14) over the M6 Nyloc Nuts
(Item 15).
Secure the top assembly to the bottom
assembly using four Ladder Joining Plates
(Item 10), with eight M6x16 Button Head
Screws, eight M6 Nyloc Nuts (Item 7 & 15).
Finish off by placing M6 Nut Caps (Item 14)
over the M6 Nyloc Nuts (Item 15).
10mm
4mm
10mm
4mm
10mm
17
9
8
15
17
18
11
16
9
15
12
12
12
15
14