Installation Guide

RRAC167_REV _A00

INSTALL OTHER VEHICLE AND RACK ACCESSORIES

Now's the time to visit your favorite Front Runner Dealer in person or online.

Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam

Share your adventures on:

FINISH

Congratulations! You did it. Take a step back and admire your work!

FIT AND SECURE 2

2.4

2.5

Determine where is best suited to mount

your ladder. It is recommended to place one

mounting bracket over a slat.

Slide the M8 x 20 Hex bolt into the slat.

Secure the assembly from 2.2 together with

the Support Bracket (Item 16) to the side

proﬁle and the slat using M8 x 20 Button

Head Bolts, M8 x 16 x 1.6SS Flat Washers,

the M8 x 20 Hex Bolt in the slat and M8

Nyloc Nuts as shown.

Use the ladder to determine the position for

the second assembly. See 2.5.

Fully tighten both the assemblies.

Place a M8 Nut Cap on the Nyloc Nut as

shown.

Place the ladder in the Ladder Brackets as

shown.

Slide the Clamps (Item 3) over the M8 x 60

Hex Bolt and tighten using M8 Eye Nuts and

Nylon Washers (Item 4 & 5) as shown.

5mm