Installation Manual

© 2022 FRONT RUNNER VEHICLE OUTFITTERS
6 KSTF001_REV_A03
FIT AND SECURE
5
5.1
Place a bead of silicone around each of the
Jack Nut openings inserted earlier in 3.4
(permanent fitment only).
Place Spacers (Item 12) over the factory rail
holes.
Secure Rack assembly 2.2 using M6 x
12 x 1 Flat Washers, M6 Spring Washers
and M6 x 30 Hex Bolts for front foot
(Items 14, 15 & 17).
Secure the middle and back feet using M8 x
19 x 2 Flat Washers, M8 Spring Washers and
M8 x 60 Hex Bolts (Item 8, 13 & 14)
Place M6 and M8 Nut Caps over all hex Bolts.
19
15
14
17
22
22
8
13
14
12
12
10mm
13mm