Installation Manual

RRAC195_REV _A01
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE 2
2.4
2.5
2.6
Secure assembly 2.3 to the front two bottom
holes on the foot rails using the fasteners
removed in step 2.1. Fully tighten.
Secure the Wind Fairing Side Supports
LH / RH (Item 2) to the foot rails top holes
as shown using M6x16 Flange Button Head
(Item 6).
Fit the Wind Fairing Rubber (Item 13) to the
Light Bar Wind Fairing (Item 1). Using the
notched section as a guide, trim if needed.
Secure the Light Bar Wind Fairing assembly
to the rack assembly, using M8x16 Flange
Button Heads (Item 6) and fully tighten.
Torx
T30
Torx
T30
Torx
T30
Cordless
Driver
2
6
6
13
1