Installation Manual

© 2022 FRONT RUNNER VEHICLE OUTFITTERS
3 KSSX001_REV_A01
FIT AND SECURE
2
2.1
2.2
2.3
Drop the vehicle's roof lining.
Remove the vehicle's Factory Roof Rails.
Secure the stiffener plates (Items 2 & 3)
to the Foot Rails (Item 1), using M6 x 16
Flange Button Heads & M6 Nyloc Nuts
(Items 13 & 14). Fully tighten.
Do this to both LH & RH Foot Rails.
Place M6 Nut Caps (Item 11) over all Nyloc
Nuts.
Torx
T30
10mm
10mm
1
2
11
3
13
14
Look online for videos to assist.
Tightening Torque 9 - 11 Nm /
6.6 - 8.1 ft lb