Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right hand side's components and fitment has been
shown.
( A )
You will need:
 13 mm Flat or Socket Wrench
 10 mm Flat or Socket Wrench
 4 mm Hex Key
 Measuring Tape
 Sealant
The Foot Rail Mounting Kit (FAVT001) that you have received is suitable for mounting a Half Rack (1255 x 1156
mm) or Full Rack (1255 x 1964 mm). If you have chosen to mount a Half Rack not all of the components supplied
will be used. It is suggested that all additional components be stored for use at a later stage should you wish to
upgrade to a Full Rack.
FAVT001_REV_A00
Item # Quantity Description
1 2 FOOT RAIL FRONT
2 2 FOOT RAIL REAR
3 12 M8x16 HEX HEAD BOLT
4 12 M8 FLAT WASHER
5 12 M8 NYLOC HEX NUT
6 12 M8 NUT CAP
7 8 M6 NUT CAP
8 8 M6x35 HEX HEAD BOLT
9 8 M6 SPRING WASHER
10 8 M6x19x1.2 FLAT WASHER
11 8 SPACER