Installation Manual

RRAC901_REV_A02

FIT AND SECURE LOAD BARS

Remove the End Cap shown and slide two

Leg Assemblies into each Rail.

3.1

3.2

3.3

Loosely assemble the M8 Bolt Plate (Item 1)

to the Legs LASS026 (not supplied) using

two M8 x 40 Carriage Bolts, two M8 x 16

x 1.6SS Flat Washer and two M8 Nyloc Nuts

(Items 2, 3 & 4) as shown.

3MM

When assembling the Legs, discard the Fitting Instructions received with the Legs (Document

LASS026) and assemble the Legs as per Assembly Instructions received with your Nut Kit (RRAC901).

Not all the components received with the Legs will be used as they will be replaced by the Nut Kit.

If your Slimline II Tray is not already assembled, assemble it as per the Slimline II Tray Universal

Fitting Instructions (Document RRSTUNI)

Leg