Installation Manual

5
3
6
7
4
2
1
17
© COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS
3 FATS001_REV_A00
FIT AND SECURE
2
13mm
2.1
2.2
2.3
Join the Front LH and Rear LH Foot Rail
(Items 1 & 2) with the Joiner Plate
(Item 3) using M6 x 16 Buttom Head
Bolts, M6 x 12 x 1SS Flat Washers and
M6 Nyloc Nuts (Items 4, 5 & 6).
Place M6 Nut Caps (Item 7) over all the
Nyloc Nuts.
Repeat this for the Front RH and Rear RH
Foot Rail.
Before starting the fitment you need to
loosen and remove the factory roof rail
from the vehicle.
Place a Plastic Rivet (Item 17) into each of
the locating holes of the factory roof rails
and knock the pin all the way in.
10mm
4mm