Installation Manual

3
KRTQ005L_REV_A00
MOUNT THE RACK TO YOUR VEHICLE
( Refer to LEG ASSEMBLY INSTRUCTION Document LASS1UNI )
(
)
A
Grab your friend and with one of you on each side of the Rack, flip the rack end over end (Prevents the
Hex Bolts from falling out the machine slots) so that the Legs are facing down. With the Wind Deflectors
facing forward, approach the vehicle from the rear lifting the Rack up and over the roof.
Position the Rack as far back as possible without it overhanging the rear of the vehicle. Bring the rack
down slowly making sure that the Legs go directly into the gutters of the vehicle.
Center the Rack left to right. Ensure that the Rack is level - front to back and left to right - before
fastenin
g
.
Congratulations, you have completed your installation. Take a step back and admire your work. Good Job!
TAKE A TRIP
After your first adventure, check that all nuts, bolts, screws and fittings are tight. Re-tighten where
needed. You'll find a small amount of settling has happened.
Go on many more adventures, periodically checking all nuts, bolts, screws and fittings.
( A )
Front Runner can not recommend a maximum load carrying capacity. Please refer to your vehicle
manufacturer's recommendations.