Installation Manual

© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4 FATL003_REV_A00
FIT AND SECURE
2
2.1
Place the assembled Foot Rails on top of the
Spacers (Item 10). Apply silicone on the
threads of the M8x40 Hex Bolts (Item 4) and
secure the Foot Rail using M8 Spring
Washers and M8 Flat Washers (Items 3 & 2).
Do this on both the left and right side of the
vehicle.
Finish off by placing M8 Nut Caps (Item 5)
over the M8 Hex Bolt heads.
To fit the Rack, proceed to Step 3.
2
3
4
5
10
FIT AND SECURE
3
2.2
2.4
2.1
3.1
3.2
4MM
Fit your roof rack to the Foot Rails using
M8x20 Hex Bolts, M8 Flat Washers and M8
Nyloc Nuts (Items 8, 2 & 9) as shown.
Make sure that the wind deflector is
installed before you proceed to the next
step.
8
2
9
5
13mm
13mm