Installation Manual

© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3 FATL003_REV_A00
FIT AND SECURE
2
2.1
2.2
2.3
Assemble the RH Front Foot Rail (Item 1)
and the RH Rear Foot Rail (Item 7) using one
Joiner Plate (Item 11), four M6x16 Button
Head Screws, four M6 Flat Washers and four
M6 Nyloc Nuts (Item 6, 12 & 13).
Do this with the LH Front and Rear Foot Rails.
Finish off by placing M6 Nut Caps (Item 14)
over the M6 Nyloc Nuts.
Locate and remove the eight plastic covers in
the ditch moulding.
Remove the two bolts and steel bracket
below each plastic cover removed.
Use De-natured Alcohol to clean the
surrounding areas of each bolt hole.
Place a bead of silicone around each hole.
Place the eight Spacers (Item 10) over each
pair of holes.
1
7
11
12
13
14
6
10mm
4mm
De-Natured
Alcohol