Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right hand side's components and fitment has been
shown.
You will need:
 13 mm Flat and Socket Wrench
 12 mm Flat or Socket Wrench
 10 mm Flat and Socket Wrench
 4 mm Hex Key
 Measuring Tape
 Rag and Methylated
Spirits/denatured Alcohol
 Silicone
( )
A
REV_A00
The Foot Rail Mounting Kit (FATL001) that you have received is suitable for mounting a Half Rack (1255 x 1156
mm) or Full Rack (1255 x 1964 mm). You have chosen to mount a Half Rack and not all of the components
supplied will be used. It is suggested that all additional components be stored for use at a later stage should you
wish to upgrade to a Full Rack.
Item # Quantity Description
1 14 M8 NUT CAP
2 8 M8 x 40 HEX BOLT
3 8 M8 SPRING WASHER
4 14 M8 FLAT WASHER
5 6 M8 x 20 HEX BOLT
6 6 M8 NYLOC NUT
7 2 REAR FOOT RAIL - 1 LEFT, 1 RIGHT
8 4 SPACER