Installation Manual

Fit the foot rails Cont...

()

Place the assembled Foot Rails onto the vehicle's roof, lining up the mounting holes in the bottom of the

Foot Rails with the mounting points on the vehicle. Depending on the vehicle specifications, you will

either use mounting point number 1 or 2 as indicated by the arrows for the front of the vehicle. The

remaining mounting point will rest on the rubber ditch moulding.

(An extra Pair of Spacers and Fasteners are provided, should you wish to Drill and Secure the Extra Foot. 1

or 2 to the Vehicle)

()

Secure the Foot Rails to the vehicle using the M8 x 40 Hex Bolts, M8 Spring Washer and M8 Flat Washers

(Items 2, 3, 4). Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.

FIT THE RACK

Note: If your Slimline II Tray is not already assembled, assemble it as per the Slimline II Tray Universal

Assembly Instruction (Document RRSTUNI). Read Step 3A before fitting the Wind Deflector

FATL002 / KRTL029T_REV_A02

The Product Sticker must go to the rear of the vehicle and

must be facing outwards. Push the Foot Rails as far back

as possible.