Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right hand side's components and fitment has been
shown.
You will need:
 13 mm Flat and Socket Wrench
 12 mm Flat or Socket Wrench
 10 mm Flat and Socket Wrench
 4 mm Hex Key
 Measuring Tape
 Rag and Methylated
Spirits/denatured Alcohol
 Silicone
 a Friend
() A
Item # Quantity Description
1 26 M8 NUT CAP
2 16 M8 x 40 HEX BOLT
3 16 M8 SPRING WASHER
4 26 M8 FLAT WASHER
5 10 M8 x 20 HEX BOLT
6 10 M8 NYLOC NUT
7 2 FRONT FOOT RAIL - 1 LFET, 1 RIGHT
8 1 REAR FOOT RAIL - 1 LEFT, 1 RIGHT
9 2 JOINER PLATE
10 8 M6 x 16 BUTTON HEAD BOLT
11 8 M6 FLAT WASHER
12 8 M6 NYLOC NUT
13 8 M6 NUT CAP
14 2 MIDDLE SPACER
15 6 END SPACER
FATL002 / KRTL029T_REV_A02