Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right hand side's components and fitment has been
shown.
You will need:
 Panel Tool / Flat Screwdriver
 13 mm Flat and Socket Wrench
 12 mm Flat or Socket Wrench
 Measuring Tape
 Rag and Methylated
Spirits/denatured Alcohol
 Silicone
( )
A
REV_A02
Item # Quantity Description
1 18 M8 NUT CAP
2 8 M8 x 40 HEX BOLT
3 8 M8 SPRING WASHER
4 18 M8 FLAT WASHER
5 10 M8 x 20 HEX BOLT
6 2 FOOT RAIL - 1 LEFT, 1 RIGHT
7 10 M8 NYLOC NUT
8 4 SPACER