Installation Manual
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
4
FATF004_REV_A01
FIT AND SECURE THE FOOT RAIL
2
13mm
2.4
2.5
Join the Front and Rear Foot Rails (Items 1
& 2) together using M6 x 16 Button Head
Bolts, M6 x 12 x 1SS Flat Washers, M6
Nyloc Nuts and the Joiner Plates (Items 10,
11, 12 & 13).
Place a M6 Nut Cap (Item 14) over each of
the Nyloc Nuts.
Place the assembled Foot Railson the
vehicle and line up the mounting holes in
the Foot Rails with the mounting holes in
the roof. The product sticker goes to the
rear and outside of the vehicle. Starting
from the front, loosely fasten the Foot Rail
to the vehicle using M8 x 35 Hex Bolts, M8
x 16 x 1.6SS Flat Washers and M8 Spring
Washers (Items 4, 5 & 6).
Tighten all bolts securing the Foot Rails to
the vehicle and place a M8 Nut Cap
(Item 3) over each bolt.
13mm
13mm
10mm
4MM
12
10
13
14
11
2
1
6
9
1
5
4