Installation Manual

3
FIT the Foot RAILS
REV_A00
Unclip and remove the rear and middle
covers each side on the top of the vehicle's
roof to expose the vehicle's mounting points.
Remove the 8mm Bolts as indicated by the
arrows using a 10mm Socket Wrench.
()
A
()
B
Clean the area around the bolt holes
using a rag and methylated
spirits/denatured alcohol. Place some
Silicone over each bolt hole.
(
C
)
Place a Spacer (Items 6) into each of
the Mounting Point Recess, lining up
the holes in the Spacers with the bolt
holes in the roof. Ensure that the wide
section of the Spacers (as indicated in
the image) go towards the outside of
the vehicle.
Wide
Narrow