Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right
hand side's components have been shown.
You will need:
 13 mm Flat or Socket Wrench
 10 mm Flat or Socket Wrench
 4 mm Hex Key
 Measuring Tape
 Rag and some Methylated Spirits
/ Denatured Alcohol
 Tube of Silicone
()
A
REV_A00
Item # Quantity Description
1 6 M8 x 20 HEX BOLT
2 2 REAR FOOTRAIL - 1 LEFT, 1 RIGHT
3 14 M8 FLAT WASHER
4 6 M8 NYLOC NUT
5 14 M8 NUT CAP
6 6 SPACER
7 8 M8 x 35 HEX BOLT
8 8 M8 SPRING WASHER
The Foot Rail Mounting Kit (FATF004) that you received is suitable for mounting a Half Rack (1255 x 1156 mm) or
Full Rack (1255 x 1964 mm). You have chosen to mount a Half Rack and not all of the components supplied will
be used. It is suggested that all additional components be stored for use at a later stage should you wish to
upgrade to a Full Rack.