Installation Manual

© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
4 FATF005_REV_A00
4
FIT AND SECURE
3
2.2
2.4
2.1
3.2
3.3
4MM
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
Make sure that the wind diflector is
installed before you proceed to the next
step.
3.4
Centre the rack and tighten fully. Use M8 nut caps (Items 10) to finish off the nuts.
FIT AND SECURE
2
2.5
Nut plate shown on the inner side of
the roof.
Fit your roof rack to the foot rails with
items 7, 8 and 9.
7
8
9
10