Installation Manual

© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4 FASO001_REV_A02
4
FIT AND SECURE
3
2.2
2.4
2.1
3.1
3.2
4MM
Make sure that the wind deflector is
installed on the bottom of the forward
most slat before you proceed to the next
step.
3.3
Center the rack and tighten fully. Use M8 nut caps (Item 3) to finish off the nuts.
With a friend, flip the Rack over and
lower it onto the Bottom Brackets,
making sure the Top Brackets (Item 1)
slide inside the Bottom Brackets (Item
2).
Secure the Top Brackets to the Bottom
Brackets by using M8 x 16 Hex Bolts, M8
x 16 x 1.6SS Flat Washers and M8 Nyloc
Nuts (Items 4, 5 & 6) as shown.
13mm
13mm
6
5
2
4
3
3