Installation Manual

© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3 FASO001_REV_A02
FIT AND SECURE
2
13mm
2.1
2.2
Remove the bolts of the OEM crossbars
and the four tie-down plates.
Secure the Foot Bottom (Item 2) by using
an M8 x 25 Hex Bolt, M8 SS Spring
Washer and M8 x 16 x 1.6 SS Flat Washer
(Items 5, 7 & 8).
Repeat this on all four mounting points.
6
5
1
4
Loosely fit the LH & RH Foot Tops (Item 1)
to the combined slat using M8 x 16 Hex
Bolts, M8 x 16 x 1.6SS Flat Washers and
M8 Nyloc Nuts (Items 4, 5 & 6)
as shown.
Repeat this on the opposite side of the
rack.
13mm
T25
T30
13mm
13mm
Front Hole Rear Hole
Front of Vehicle