Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right hand side's components and fitment has been
shown.
You will need:
 10 mm Tube Socket & Wrench
 13 mm Flat and Socket Wrench
 Measuring Tape
 Small Flat Screwdriver
() A
REV_A01
Item # Quantity Description
1 8 M6 NUT CAP
2 8 M6 NYLOC NUT
3 8 M6 x 19 x 1 FLAT WASHER
4 4 FOAM PAD
5 8 M8 x 20 HEX BOLT
6 8 M8 FLAT WASHER
7 8 M8 NYLOC NUT
8 8 M8 NUT CAP
9 2 FOOT RAIL - 1 LEFT, 1 RIGHT