Installation Manual

LASS029_REV_A00
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
4
2
12
8
6
7
13
11
12
10
FIT AND SECURE
2
Center the rack on the Legs before fully
tightening (LH = RH).
Finish off by placing M8 Nut Caps (Item 9)
over all M8 Nyloc Nuts.
Use the same method for load bars.
2.4
2.5
2.6
Loosely fit your Slimline II Rack by using
M8 x 25 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nylocs (Items 10, 11, 13)
as shown.
You can use the same method for load bars.
Assemble the Legs (Item 12) to the Leg Mount
(Item 3) by using M8 x 20 Button Heads, M8
Sping Washers, M8 x 19 x 2SS Flat Washers
(Items 6, 7 & 8) and the Nut Plates (Items 2).
5MM
13MM
LH = RH