Installation Manual

LASS029_REV_A00 3
1
1
1
3
4
5
FIT AND SECURE
2
Looking from the side of the vehicle, position
the Leg Mounts (Item 3) to center the
Slimline II Rack or place load bars where
desired over the load bed.
10MM
2.1
2.2
2.3
=
=
Loosely fit a Leg Mount (Item 3) to each of
the Stud Plates using M6 x 19 x 1SS Flat
Washers and M6 Nyloc Nuts (Items 4 & 5).
Slide two M6 Stud Plates (Item 1) into each
side profile.
(Two are needed per side to fit Load Bars or
a Rack)
10MM
10MM