Installation Manual

3
Fit the foot rails
Looking at the rear of the vehicle's roof, carefully remove the plastic cover either side to expose the two
mounting studs.
()
A
REV_A00
Looking at the front of the vehicle's roof, carefully remove the plastic cover either side to expose the two
mounting studs.
()
B
Place the Foot Rails onto the vehicle's roof, lining up the mounting holes in the bottom of the Foot Rails
with the studs in the vehicles roof. The Product Sticker must go to the rear of the vehicle and must be
facing outwards. Push the Foot Rails as far back as possible and secure them to the vehicle using eight
M8 x 19 Flat Washers and eight M8 Nyloc Nuts (Items 2 & 3). Place a M8 Nut Cap (Item 1) over each M8
Nyloc Nut.
Product Sticker
()
C