Installation Manual

3
FIT the Foot RAILS
Usin
g
the Torx Driver received in
y
our vehicles' tool kit
,
loosen and remove the vehicles' roof rack/rails.
()
A
() B
Using the fourteen M6 x 20 Button Head Bolts (Item 11) supplied, place a small amount of silicone on the
thread of each bolt and secure them to the mounting points in Set B, thereby sealing the mounting points.
Vehicles' Roof - To
p
View
Front
Rear
- Mounting Points Set A
- Mounting Points Set B
Place the left and right hand side Front Foot Rails (Item 5) onto the vehicles' roof, lining up the mounting
points in the Foot Rails with the first three mounting points in the front of the vehicles' roof.
()
C
Loosely secure the Front Foot Rails to the vehicles' roof using six M6 x 30 Hex Bolts, six M6 x 19 Flat
Washers and six M6 Spring Washers (Items 2, 3, 4).
() D
Place the Rear Foot Rails (Item 10) onto the vehicles' roof lining them up with the remaining mounting
points. Loosely secure the rear Foot Rails to the vehicles' roof using remaining M6 x 30 Hex Bolts, six M6
x 19 Flat Washers and six M6 Spring Washers (Items 2, 3, 4).
() E
REV_A00