Installation Manual

2
You will need:
 13 mm Flat or Socket Wrench
 10 mm Flat or Socket Wrench
 4 mm Hex Key
 Measuring Tape
 Tube of Silicone
 a Friend
Familiarize yourself with the parts and then step away from the work area and read through these in-
structions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at for FANX002: Please note that only
the right hand side's components have been shown.
() A
Item # Quantity Description
1 14 M6 NUT CAP
2 14 M6 x 30 HEX BOLT
3 14 M6 SPRING WASHER
4 14 M6 x 19 FLAT WASHER
5 2 FRONT FOOT RAIL - 1 LEFT, 1 RIGHT
6 14 M8 x 20 HEX BOLT
7 14 M8 FLAT WASHER
8 14 M8 NYLOC NUT
9 14 M8 NUT CAP
10 2 REAR FOOT RAIL - 1 LFEFT, 1 RIGHT
11 14 M6 x 20 BUTTON HEAD BOLT (NOT PICTURED, REFER TO STEP 2C)
REV_A00