Installation Manual

FIT AND SECURE
3
2.2
2.4
2.1
3.2
3.3
4MM
3.1
Refer to RRSTUNI fitting instruction when assembling your Slimline II Tray.
Make sure that the wind deflector is
installed before you proceed to the next
step.
3.4
Center the rack and tighten fully. Use M8 nut caps (Items 14) to finish off the nuts.
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
5 FANP001_REV_A00
4
Fit your roof rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 12,
10 & 13).
12
10
13
14
13mm