Installation Manual

© 2019 FRONT RUNNER VEHICLE OUTFITTERS
4 FAMP002_REV_A01
4
FIT AND SECURE
3
2.2
2.4
2.1
3.2
3.3
4MM
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
Make sure that the wind deflector is
installed before you proceed to the next
step.
3.4
Centre the rack and fully tighten all the fasteners. Use M6 & M8 nut caps (Items 8 & 15) to
finish off the nuts.
Slide Item 12 into the t-slots shown in
3.3. Loosely fit the roof rack to the foot
rails by using Items 13 & 14.
12
13
14
13mm
13mm