Installation Manual

2
Assemble your Slimline II Rack
Refer to Slimline ( II Tray Universal Assembly Instruction Document RRSTUNI)
MOUNT YOUR TRACKS
(Refer to Track Mounting Instruction Document TRMP004)
With your Rack in the upside down position (Product sticker should be upside down), fit the Foot Adapter
Plates and top of the Feet to your Slimline II Tray as illustrated below.
Fit the feet
Refer to Foot Assembly & Slimline ( II Tray Foot Adapter Instructions Documents FASSUNI & RRAC021)
()
A
NOTE: DO NOT SLIDE THE RACK AND FEET ACROSS THE ROOF! If there is a chance that you are going to set
the roof rack on to the roof, place some moving blankets and/or towels over the roof. If you must lower
the rack before it is in position, carefully set the Feet on the padded surface.
Once your Slimline II Roof Rack is fitted, ensure a 15mm clearance is maintained between the Wind
Deflector and the vehicles roof otherwise damage to the roof may occur. Bend the Wind Deflector by hand
if necessary.
REV_A00