Installation Manual

RRAC174_REV_A01
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Remove one of the Corner Pieces on the
front of your rack.
Loosely fit the provided four M8x20 Hex
Bolts and four M8 Nyloc Nuts to the Wind
Fairing Brackets (Item 1) as shown. Slide
the loosley assembled Brackets into the
Bottom Channel.
M8x20 Hex Bolt
M8 Nyloc Nut
Refit the front corner removed.
Center the Wind Fairing (Item 2) and
position the Wind Fairing Brackets (Item 1)
aligning the slotted holes. Fully tighten the
Brackets to the rack.
4mm
A
B
1
A
B
13mm
1
2