Installation Manual

© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4 FAIK002_REV_A00
FIT AND SECURE
2
Place a bead of silicone down the threads of
each bolt before inserting.
Place the Foot Rail (Item 1) onto the Spacers
(Item 6 & 7), aligning the holes in the base of
the Foot Rail with the center of the Spacers.
Secure the Foot Rail to the vehicle using
the M8x40 Hex Bolts, M8 Spring Washers
& M8x19x2 Flat Washers (Items 8, 9 & 10).
Fully tighten.
Place M8 nut caps (Item 5) over all nyloc
nuts.
2.4
FIT AND SECURE
3
2.2
2.4
2.1
3.2
3.3
4MM
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
Make sure that the wind deflector is
installed before you proceed to the next
step.
Fit your roof rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts
(Items 2, 3 & 4) as shown.
13mm
Center the rack & fully tighten all
fasteners. Place M8 Nut Caps (Item 5)
over all Nyloc Nuts.
9
10
5
8
7
6
2
3
4
5