Installation Manual

3
Fit the foot rails
Remove the two end caps, front and rear on each Roof Rail and undo the bolts as indicated by the arrows
securing the Roof Rails to the vehicle.
( )
A
REV_A02
( )
B
Remove the cover from the middle of each Roof Rail and undo the bolt as indicated by the arrow. Remove
the Roof Rails from the vehicle. Remove the two remaining bolts to expose the threaded mounting points
in the vehicle's roof.
Clean the area around each of the threaded mounting points and apply some silicone over each point.
Place three Spacers (Item 9) over each of the front and middle mounting points and four Spacers on each
of the rear mounting points as shown. The Spacers must be placed with the wider section towards the
outside of the vehicle.
( )
D
WIDER SECTION TOWARDS OUTSIDE OF VEHICLE