Installation Manual

4
Fit the foot rails Cont...
REV_A02
Place the Foot Rails onto the vehicle's roof, lining up the mounting holes in the bottom of the Foot Rails
with the mounting points on the vehicle. The Product Sticker must go to the rear of the vehicle and must
be facing outwards. Push the Foot Rails as far back as possible.
Product Sticker
( )
E
( )
D
Secure the Foot Rails to the vehicle using eight M8 x 40 Hex Bolts, eight M8 Spring Washer and eight M8 x
19 Flat Washers (Items 2, 3, 4). Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.
(
F
)
Secure the front Spacers to the vehicle using the remaining M8 x 40 Hex Bolts, M8 Spring Washer and M8
x 19 Flat Washers. Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.