Installation Manual

LASSUNI_REV_A03 3
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
2
4
1
3
6
3
7
8
13mm
FIT AND SECURE
2
2.2
2.3
2.4
2.1
2.1
2.2
2.3
Slide two M8 x 25 Hex Bolts (Item 2) into
the Slats machined slots.
13MM
Loosely fit the Legs (Item 1 OR 9) using
M8 x 16 x 1.6SS Flat Washers and M8 Nyloc
Nuts (Items 3 & 4).
Place M8 Nut Caps (Item 5) on all the Nyloc
Nuts after fully tightening.
Secure the Gutter Clamps (Item 6) using
M8 x 30 Button Heads, M8 SS Spring
Washers and M8 x 16 x 1.6SS Flat Washers
(Items 3, 7 & 8).
5MM
RECOMMENDED SPACING BETWEEN
LEGS OR FEET ARE 3 SLATS.
SPACING MAY NOT EXCEED 4 SLATS.
IF YOU ARE FITTING A DIAGONAL LEG,
REFER TO FIGURE 1.2 FOR ASSEMBLY.