Installation Manual

KRLD037T_REV_A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
Assemble your Slimline II Tray, referring to
the RRSTUNI fitment guide.
Fit your roof rack to the tracks using the
inserted Stud Plates, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts shown.
Make sure the Feet are pushed fully to the
rear of the tracks as shown before fully
tightening.
Center the rack and tighten fully. Finish off by placing M8 Nut Caps over all the M8 Nyloc Nuts.
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
IMPORTANT!
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER
FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
13mm