Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
GET ORGANIZED...
Here is what you are looking at: Please note that only the right
hand side's components have been shown and that not all
fasteners received will be used.
You will need:
 13 mm Flat and Socket Wrench
 10 mm Flat and Socket Wrench
 4 mm Hex Key
 Ladder
 Friend
 Measuring Tape
 Small Flat Screw Driver
 T27 Torx Wrench
()
A
REV_A01
Item # Quantity Description
1 16 M6 NUT CAP
2 8 M6 x 20 HEX BOLT
3 8 M6 SPRING WASHER
4 8 M6 x 19 FLAT WASHER
5 1 COVER PLATE
6 2 FRONT FOOT RAIL - 1 LEFT, 1 RIGHT
7 8 M6 x 16 BUTTON HEAD BOLT
8 2 JOINER PLATE
9 8 M6 FLAT WASHER
10 8 M6 NYLOC NUT
11 2 REAR FOOT RAIL - 1 LEFT, 1 RIGHT