Installation Manual

© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3 KRJW026T_REV_A00
FIT AND SECURE
2
2.1
2.2
2.3
Flip the Tray so that the bottom of the Tray
faces up.
Insert four M8 x 16 Hex Bolts into the
machined slots of the slats as shown.
Insert four M8 x 30 Hex Bolts into the
machined slots of the slats as shown.
Before continuing, ensure that your wind
deflector is fitted according to Fitment guide
WDST009.
Loosely assemble the Legs & Spacers
(Items 1, 3 & 4) as shown, slats indicated in
2.2 using M8 Flat Washers and M8 Nyloc
Nuts included in the Leg sets.
Refer to LASSUNI fitment guide.
B
D
A
3mm
5mm
13mm
B
Do not fit wind deflector supplied with
rack.
A
A
B
1
3
4
Front
Rear