Installation Manual

FAJT001 / FAJT002_REV_A00

COMPLETION

4.1

Congratulations! You did it. Take a step back and admire your work!

INSTALL OTHER VEHICLE AND RACK ACCESSORIES

Now's the time to visit your favorite Front Runner Dealer in person or online.

IMPORTANT!

Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam

Share your adventures on:

FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER

FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.

Should you wish to remove your rack, you

will need to plug the holes you drilled in the

roof using the supplied Seal Kit (Item 19).

Remove the Tray and the Foot Rail by

reversing the installation procedure.

Leave the Foam Washer and the Aluminum

Spacers in place. Screw in the Sealing Plugs,

reusing the M6 Nyloc Nuts and Washers that

held the Foot Rail in position.

REMOVING YOUR RACK

2.10

10mm

4mm