Installation Manual

7 FAJT001 / FAJT002_REV_A00
4
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
Place the Foot Rail (Item 1) onto the Spacers
and secure using M6 x 40 Hex Bolts, M6 x 30
x 2 Flat Washers, M6 x 12 x 1SS Flat Washer
and M6 Nyloc Nuts (Items 7, 8, 11 & 12) as
shown. Do this on both sides of the vehicle.
Finish off by placing M6 Nut Caps (Item 13)
on all the bolt heads.
FIT AND SECURE
2
2.10
FIT AND SECURE
3
2.2
2.4
2.1
3.1
3.2
4MM
3.3
Center the rack and tighten fully. Use M8 Nut Caps (Item 5) to finish off the nuts.
Fit your Roof Rack (1/2 Rack shown) to the
Foot Rails using M8 x 20 Hex Bolts, M8 x
16 x 1.6SS Flat Washers and M8 Nyloc Nuts
(Items 2, 3 & 4).
Make sure that the wind deflector is installed
before you proceed to the next step.
Refer to Rack Fitment Guide (RRSTUNI).
7
8
11
12
13
2
3
4
5
10mm
13mm
Rear Of Vehicle
For a Full Rack fitment refer to FAJL004
Fitment Guide (Steps 2.1, 2.2, & 2.6).