Installation Manual

© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4 FAIK001_REV_A00
4
FIT AND SECURE
2
2.4
2.5
Put a small amount of silicone over each
Mounting Point and placea Spacer (Item
9) on top of the Silicone, lining up the
hole in the Spacer with the mounting
point.
Note: For the 2015 to current vehicle
models, the 20mm Spacers (Item 10)
must be used at the rear mounting
points.
Place the Foot Rail (Item 1) onto the
Spacers, aligning the holes in the base
of the Foot Rail with the center of the
Spacers. The product sticker goes to
the front of the vehicle and must face
outwards.
Secure the Foot Rail to the vehicle
using the M8 x 40 Hex Bolts, M8 Spring
Washers and M8 x 19 Flat Washers
(Items 3, 4 & 5).
Do this on both left and right side of the
vehicle.
2
3
4
5
5
13mm