Installation Manual

© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4 FAFT002_REV_A00
FIT AND SECURE
2
2.4
Secure the Foot Rails (Step 2.1) to the
vehicle using M8 x 25 Hex bolts (Item 8), M8
Spring Washers (Item 9) & M8 x 16 x 1.6 Flat
Washers (Item 10).
Place M8 Nut Caps (Item 7) over all Nyloc
Nuts.
Place a bead of silicone along the bolt
threads before securing to the roof.
FIT AND SECURE
3
2.2
2.4
2.1
3.2
3.3
4MM
3.1
Refer to RRSTUNI when assembling your Slimline II Tray.
Make sure that the wind deflector is
installed before you proceed to the next
step.
Fit your roof rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 11,
15 & 16) as shown.
13mm
Center the rack and fully tighten. Place
M8 Nut Caps ( Item 8 ) over all Nyloc
Nuts.
11
10
9
8
7
13
11
14
8
13mm