Installation Manual

FASS016_REV_A00
© COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.2
2.4
2.1
2.4
2.5
With the help of a friend, flip the rack right
side up.
Lower the rack onto the tracks while
aligning the Feet with the Stud Plates in the
tracks.
Loosely secure the Feet to the track using
M8 x 16 x 1.6SS Flat Washers and M8 Nyloc
Nuts (Items 4 & 5).
13MM
Before placing the rack onto the vehicle,
slide the Stud Plates (Item 2) removed in
Step 2.3 into the tracks.
2
2
Track
5
4
Before tightening the Feet to the tracks,
move the rack so the it sits level to the
ground, not the vehicle's roof line, or slanting
slightly down toward the front.
After you have tightened the Feet to the
tracks, center the rack left to right and
fully tighten the fasteners from Step 2.3.
Place M8 Nut Caps on all the Nyloc Nuts.