Installation Manual

LASS034_REV _A01
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
5
FIT AND SECURE 2
2.7
2.8
2.9
Join the Rear Side Mount and the Front Side
Mount with the Wild Track Joiner (Item 5)
using M8 x 20 Button Head Bolts, M8 SS
Spring Washers and M8 x 16 x 1.6SS Flat
Washers (Items 12, 14 & 17).
Join the Rear Side Mount and the Front
Side Mount with the Standard Joiner (Item
5) using M8 x 20 Button Head Bolts, M8 SS
Spring Washers and M8 x 16 x 1.6SS Flat
Washers (Items 12, 14 & 17).
5
12
14
17
12
14
17
6
Push the assembly from 3.2 in behind the
top lip of the load bed so that the front part
of the clamp is positioned on the inside of
the load bin.
Secure the bottom of the Rear Support to
the vehicle's tie down points using the bolts
removed earlier in 3.6.
Top Lip Of Load Bed
WILDTRAK FITMENT
STANDARD FITMENT
5mm
5mm
Back
Front
Front
NOT FOR USA SPEC
NOT FOR USA SPEC