Installation Manual

LASS034_REV_A01
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.1
2.2
2.3
Assemble the rear support (Item 2) to the
Rear Side Mount (Item 1) using M8 Nyloc
Nuts and M8 x 16 x 1.6SS Flat Washers
(Items 11 & 12).
Do this with both the left and right side.
(LHS side shown).
Assemble Spacers (Item 8) to the Rear Side
Mount using M6 x 12 Button Head Bolts
(Items 16).
Assemble Spacers (Item 8) to each of the
four Clamps (Item 7) using M6 x 12 Button
Head Bolts (Item 16).
2
1
12
11
10
16
8
16
8
7
13mm
5mm
5mm
Not all hardware will be used for this
fitment.
NOT FOR USA SPEC
NOT FOR USA SPEC