Installation Manual

FIT AND SECURE
3
2.2
2.4
2.1
3.1
3.2
4MM
3.3
Center the rack and tighten fully. Use M8 Nut Caps (Item 4) to finish off the nuts.
Fit your Roof Rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 5, 6 & 7).
Make sure that the wind deflector is installed
before you proceed to the next step.
Refer to Rack Fitment Guide.
© COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS
4 FAFF001_REV_A00
FIT AND SECURE
2
2.4
Place a bead of silicon around each of the
Jack Nut openings inserted earlier
in Step 2.3.
To fit the Foot Rails (Item 1LH & 1RH), place
the Spacers (Item 2) over the Jack Nuts
inserted in Step 2.3, followed by the Foot Rail
(Item 1).
Secure the Foot Rails using the M6 x 40 Hex
Bolts with silicon on the threads, M6 SS
Spring Washers and M6 x 19 x 1SS Flat
Washers (Items 9, 10 & 11).
Do this on both left and right side of the
vehicle.
Finish of by placing M6 Nut Caps (Item 8) on
the M6 Bolt heads.
11
10
9
8
3
2
6
5
4
7
10mm
13mm